Phase equilibria in the zirconia–yttria/gadolinia–silica systems

Phase equilibria in ZrO₂-YO_1.5-SiO₂ (ZYS) and ZrO₂-GdO_1.5-SiO₂ (ZGS) were experimentally assessed at 1400?°C and 1600?°C as they can offer insight on reactions between thermal barrier coatings (TBCs) based on ZrO₂-YO_1.5/GdO_1.5 and molten silicate deposits in gas turbine engines. Features shared in both systems include the absence of ternary compounds and no ternary solubility in the binary phases. In ZYS however, a quaternary invariant reaction was observed that eliminates the zircon-disilicate equilibrium at higher temperatures. The results suggest no appreciable difference in the reactions between silica and thermal barrier oxides based on ZrO₂-YO_1.5 or ZrO₂-GdO_1.5, or environmental barrier coatings based on the corresponding Y/Gd silicates. The phase diagrams derived from these experiments are part of a broader effort to develop thermodynamic databases that can help guide the design of next-generation TBCs.     

Wetting,infiltration and interaction behavior of CMAS towards columnar YSZ coatings deposited by plasma spray physical vapor

Thermal barrier coatings (TBCs) produced by electron beam physical vapor deposition (EB-PVD) or plasma spray (PS) usually suffer from molten calcium-magnesium-alumino-silicate (CMAS) attack. In this study, columnar structured YSZ coatings were fabricated by plasma spray physical vapor deposition (PS-PVD). The coatings were CMAS-infiltrated at 1250?°C for short terms (1, 5, 30?min). The wetting and spreading dynamics of CMAS melt on the coating surface was in-situ investigated using a heating microscope. The results indicate that the spreading evolution of CMAS melt can be described in terms of two stages with varied time intervals and spreading velocities. Besides, the PS-PVD columnar coating (～100?μm thick) was fully penetrated by CMAS melt within 1?min. After the CMAS attack for 30?min, the original feathered-YSZ grains (tetragonal phase) in both PS-PVD and EB-PVD coatings were replaced by globular shaped monoclinic ZrO₂ grains in the interaction regions.     

Fabrication of ZnO-functionalized polypyrrole microcomposite as a protective coating to enhance anticorrosion performance of low carbon mild steel

In the present work, PPy, ZnO, and polypyrrole/zinc oxide (PPy/ZnO) microcomposites (1, 2, and 5 wt%) were prepared and their properties have been tuned for anticorrosion applications on low carbon mild steel. The synthesized products: ZnO, PPy, and composites were characterized by various sophisticated analytical techniques such as XRD, FTIR, Raman, FESEM, EDX, UV–VIS, TGA, and BET. The band frequencies observed at 480 and 588 cm⁻¹ in FTIR spectrum correspond to stretching vibrations of Zn-O and N-H bonds, respectively, broadening of the bands in the composites indicate strong interactions between ZnO and PPy matrix. The potentiodynamic polarization study of PPy and PPy/ZnO composite was carried out in 3.5% NaCl solution to investigate the corrosion resistance efficiency. PPy/1 wt% ZnO (I_corr = 190 nA) composite coating on low carbon mild steel was observed to exhibit best corrosion protection property compared to PPy (121 μA), 2 and 5 wt% ZnO (242, 295 nA) composites. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48319.     

Innovative conductive polymer composite coating for aircrafts lightning strike protection

A new kind of high electrical conductive epoxy coating with low filler rate was investigated for lightning strike protection (LSP) of carbon fiber reinforced polymer (CFRP). The coating without CFRP substrate was firstly studied. The influence of silver submicronic wires (AgSWs) with a high aspect ratio on the electrical behavior is observed; that is, the electrical resistivity evolution, the current density value, and the electrical conduction mechanisms as function of temperature. The preponderant electrical conduction mechanism is an Ohmic behavior. The higher level of conductivity obtained is 5.5 × 10⁵ S m⁻¹ for 9% vol of AgSWs. Lightning strike tests were carried out on an epoxy/AgSWs coating filled with 8% in volume (74 gsm) and deposited on a CFRP. The ultrasonic testing after lightning strike on coated CFRP shows no structural delamination and demonstrates the interest of this new route for an efficient LSP. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 137, 48700.     

Anticorrosion reinforcement of waterborne polyacrylate coating with nano-TiO2 loaded graphene

Photocathodic protection coatings have been widely applied in various areas such as ship and architectural protection, or chemical industry. In this work, a composite of titanium dioxide loaded with reduced graphene oxide (RGO/TiO₂) was prepared and used as filler on waterborne polyacrylate (PA) coating to reinforce the metal protection against corrosion. Compared with the current filler of zinc phosphate used for anticorrosive coating, the photoelectrochemical properties of RGO/TiO₂-PA coating exhibit improved photocathodic protection under visible light illumination since RGO/TiO₂ composite has significant superiority in enhancing metal protection due to its dispersion, micropore blocking ability, and photoelectrochemical conversion performance. The mechanism of anticorrosion reinforcement of RGO/TiO₂-PA coating was hypothesized that graphene provides an extrabarrier layer to obstruct corrosive in dark condition and photocathodic protection under lighting. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48733.     

石墨烯改性涂层防护性能研究

为减少团聚，提高石墨烯在涂层中的分散性，研究采用纳米分散技术预先制备了石墨烯分散液，再将其分散至环氧树脂中获得石墨烯改性复合涂层。通过对石墨烯含量为 0、0.3%、0.6%的复合涂层进行盐水浸泡、盐雾、阴极剥离实验及电化学性能测试，证明石墨烯的加入显著增强了涂层的防护性能。石墨烯复合涂层在 3.5%盐水中浸泡 1 008 h后，涂层低频阻抗仍大于 106 Ω·cm²比未添加石墨烯的涂层提高了 3个数量级，且盐雾实验 6 000 h后涂层表面仍保持完好；含 0.6%石墨烯，的涂层耐蚀行为劣于石墨烯含量为 0.3%的涂层。     

Durability of YSZ coated Ti2AlC in 1300°C high velocity burner rig tests

A thermal barrier coating (TBC) system survived 500 hours in aggressive, 1300°C burner rig testing. The yttria-stabilized zirconia (7YSZ) TBC was plasma sprayed on an oxidation-resistant Ti₂AlC-type MAX phase and tested in a jet fuel burner at 100 m/s, using 5 hours cycles. No coating spallation or surface recession was observed; Al₂O₃-scale growth produced a slight 2.4 mg/cm² mass gain. The coating surface exhibited craze-cracked colonies of [111]_flourite textured columns, with no visible moisture attack. The 20 μm alumina scale remained intact under the YSZ face, about twice that producing failure for TBC/superalloy systems. TiO₂ nodules, initially formed on the uncoated backside, were removed, and Al₂O₃ was etched through volatile hydroxides formed in water vapor (~10%). Overall, the test indicated exceptional stability of the YSZ/Al₂O₃/Ti₂AlC system under turbine conditions due in large part to close thermal expansion matching.     

Sintering behavior of a nanostructured thermal barrier coating deposited using electro-sprayed particles

During high temperature service, a series of microstructure and phase evolutions occur in thermal barrier coatings (TBCs), which result in degradation of thermal insulation and durability. In this study, the sintering behavior of an air plasma sprayed 8 wt% YSZ coating deposited using electro-sprayed nanostructured particles (ESP) as feedstock powder was investigated and compared with conventional YSZ coating deposited using hollow spherical powders (HOSP). Due to the distinct asymmetric porous structure formed by nanosized YSZ particles, the ESP powder was partially melted in the plasma jet during the deposition, which resulted in the formation of a nanostructured coating that consisted of porous nanozones and dense zones. The ESP coating not only shows a significantly lower initial thermal conductivity of 0.70 W/mK, but also exhibits a stronger sintering resistance in terms of phase stability and thermal insulation compared to the conventional coating. When subjected to prolonged sintering at 1400°C for 128 hours, the thermal conductivity of the ESP coating would gradually increase to about half that of the HOSP coating at 1.29 W/mK. These differences are ascribed to the interaction among different sintering behavior between nanozones and dense zones.     

机械涂覆技术在光催化材料制备中的应用进展

机械球磨技术因工艺简单、成本低廉而受到广泛关注,特别在粉体材料的混合、细化及合金化等领域有着广阔的应用前景。综述了由机械球磨原理发展而成机械涂覆技术的应用现状,包括用于材料表面改性的功能涂层和光催化降解的薄膜材料制备。分析了工艺参数、涂覆材料及涂覆基底等因素对涂覆效果（厚度）的影响规律,并对该技术在薄膜制备中表现出的简便、廉价且可在球形等形状复杂基底上成膜的独特优势做了讨论。基于当前机械涂覆技术制备的薄膜形貌、厚度不可控且成膜基底材质受限等现状,指出今后应该向拓展成膜基底材料类型和加快推进光催化薄膜材料的实际应用方向发展。     

Density functional theory and machine learning guided search for RE2Si2O7 with targeted coefficient of thermal expansion

Density functional theory (DFT) calculations and machine learning (ML) methods are used to establish a relationship between the crystal structures of rare-earth (RE) disilicates (RE₂Si₂O₇) and their coefficient of thermal expansion (CTE). The DFT total energy data predict the presence of several energetically competing crystal structures, which is rationalized as one of the reasons for observing polymorphism. An ensemble of support vector regression models is trained to rapidly predict the CTE as a function of RE₂Si₂O₇ crystal chemistry. Experiments subsequently validated the structure and CTE predictions for Sm₂Si₂O₇.